通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
北京金驼铃通信技术有限公司
北京金驼铃通信技术有限公司
GTTMSAP2000Integrated-serviceOptical1
1. Overview
GTT MSAP 2000 integrated service optical transmission platform adopt SDH/MDTP technique kernel design, it is the product of MSTP on access level essentially, but compare with traditional MSTP equipment, MSAP equipment can not only access standard MSTP terminal equipment, but also can access low-cost PDH optical terminal, network optical terminal, protocol converter, optical transceiver and FX optical modem etc terminal equipment.
GTT MSAP 2000 integrated service optical transmission platform has 4 or 8 STM-1/STM-4 uplink optical interfaces, possess totally synchronous timing function, powerful nonblocking cross connection matrix, can use to build point-to-point, chain, star and ring transmission network, SNC/P function, and serve for telecom, traffic, energy, public security, troop etc.
GTT MSAP 2000 integrated service optical transmission platform use STM-1/STM-4 etc optical interface to replace the E1 electric interface of numerous traditional SDH/PDH equipment and Ethernet electric interface of optical transceiver and protocol converter etc, solve the problems of more fault points, high maintenance cost, can not unified network management by excessive of E1 cable or five-type cable, through the conversion of E1, V35, Ethernet etc service to VC12 and unified dispatch, create the condition for flexible service configuration and improve the efficiency of open service. Owing to realize the super-integration of equipment and ports, reduce the machine room space cost of local end PDH, converter, optical transceiver etc equipment, and support unified network management platform at the meantime.
GTT MSAP 2000 integrated service optical transmission platform consists of local equipment, remote equipment and element management system.
2. System feature
Provide 4 or 8 STM-1/STM-4 uplink optical interfaces; realize the seamless connection of access network and LAN
Support 1008 route E1 electric path maximum
Provide 48 down-link optical interfaces access (optical transceiver access can provide 96 optical interfaces access)
Provide channelizing integrated access of E1 and Ethernet service
Card structure, support mixed plug-in of several services, the service board contains SDH optical branch board, PDH optical interface, multi-service interface board, EOS Ethernet optical/electrical interface board, switched EOS optical/electrical interface board, E1 interface board, GE Ethernet convergent board.
Provide dual power supply access, each service board card support hot plug, convenient for maintenance and upgrade of system.
Support 16×16 VC-4 or 1008×1008 VC-12 intersection capacity
Support 2.048Mbit/s external synchronization signal input/output interface
Complete clock function, provide clock trace and holding facility, clock source can select fold line clock, external clock and free oscillation clock
Support channel protection and sub-network connect protection; the protection switch time is superior to national standard
Provide several networking mode: point-to-point, chain, circular, star and circular branch etc network
Provide Ethernet and QX network management interface, the network management can provide the function of configuration, alarm, performance, maintenance and security for the equipment.
3. Technical superiority
Back board Ethernet bus upgrade to 1000M Ethernet bus;
Intersection capacity of STM-1 and STM-4 upgrade to separated bus mode for every back board service slot (155M bandwidth per slot);
GE board and back board Ethernet interface can support 1000M;
EOS Ethernet (optical or electrical) convergent function can provide 8 routes for each board, the whole frame can convergence 96 routes Ethernet;
Multi-service interface board can provide 4 optical interfaces, each optical interface provide 4 E1 interface + FE, FE is EOS mode, each frame can provide 48 optical direction E1, V35, FE access;
Intersection capacity of STM-1 is 16*16 and STM-4 is 16*16;
EOP board can provide 63 E1 interface channel, can corresponding to 1-32 remote 1-8E1 Ethernet converter or 1-8E1 FX optical modem.
4. Physical characteristic
The whole machine is 19 inch 7U front plug-in card structure, 17 card slot
Width × depth × height = 485MM × 275 × 310MM
Full assemble weight: <12kg
Power supply: DC -48V, support power dual input; power consumption <500W
Working temperature: 5℃-40℃; storage temperature: -20℃-70℃; relative humidity: <95% (non-condensing)
5. GTT MSAP 2000 integrated service optical transmission platform series board card list
| Product | Product Description | Product Model | Supported remote equipment type and remarks | |
| MSAP 2000 configuration frame | Required match | Frame | MSAP 2000 | 7U height，provide 17 slots. Slot configuration as follow: #1-#6 and #11-16：service slot, can mixed plug arbitrarily #7：main control board slot #8-9：uplink optical interface slot, dual-board support 1+1over board protection #11：convergent board slot #17：fan board slot |
| Fan board | FAN | Integrate the monitoring of temperature, humidity and rotating speed of the fan | ||
| Main control board (embedded DCN network management channel) | MCU | Provide Ethernet network management interface, connect to external Ethernet can realize remote network management monitoring function based on TCP/IP protocol; support local Debug interface, the interface is RS232 and Ethernet, support embedded DCN function at meantime | ||
| Uplink optical interface board | Selected match | 2×STM-1 optical interface | OP1 | Uplink capacity 2×STM-1 |
| 4×STM-1 optical interface | OP1-4 | Uplink capacity 4×STM-1 | ||
| 2×STM-4 optical interface | OP4 | Uplink capacity 2×STM-1 | ||
| 4×STM-4 optical interface | OP4-4 | Uplink capacity 4×STM-4 | ||
| GE convergent board | Selected match | 2×GE (optical/electrical selected) | GEF | Complete Ethernet convergent function with switched service board |
|
其他推荐产品更多>>
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN 智慧城市网 设计制作，未经允许翻录必究 . 请输入账号 请输入密码 请输验证码 | ||||
