Feature
l Hot-pluggable SFP+ footprint
l Supports up to 6.0Gb/s bit rates
l Power dissipation < 1.5W
l Single 3.3V power supply
l Maximum link length of 20km
l CWDM wavelength DML transmitter, PIN photo-detector
l Duplex LC connector
l Power dissipation < 1.5W
l Built-in digital diagnostic functions
l Case temperature range :-5°C to 70°C
Application
l Optical Transmission Network
Outline Dimensions

Optical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note | |
| Transmitter | |||||||
| Average Launched Power | PO | 0 |
| +5 | dBm | Note (1) | |
| Extinction Ratio | ER | 3.5 |
|
| dB |
| |
| Center Wavelength | λc | 1270 |
| 1610 | nm |
| |
| Center Wavelength Space |
|
| 20 |
| nm |
| |
| Spectrum Band Width (RMS) | σ |
|
| 1.0 | nm |
| |
| SMSR |
| 30 |
|
| dB |
| |
| Transmitter OFF Output Power | POff |
|
| -40 | dBm |
| |
| TX Jitter (peak-peak) | Txj |
|
| 0.1 | UI |
| |
| TX Jitter (RMS) | Txjrms |
|
| 0.01 | UI |
| |
| Transmitter and Dispersion Penalty | TDP |
|
| 3.0 | dB |
| |
| Output Eye Mask | Compliant with IEEE 0802.3ae |
|
| ||||
| Receiver | |||||||
| Input Optical Wavelength | λ | 1270 |
| 1610 | nm |
| |
| Receiver Sensitivity |
|
|
| -14 | dBm | Note (2) | |
| Input Saturation Power (Overload) | Psat | 0.5 |
|
| dBm |
| |
| LOS Detect -Assert Power | PA | -32 |
|
| dBm |
| |
| LOS Detect - Deassert Power | PD |
|
| -15 | dBm |
| |
| LOS Detect Hysteresis | PHYS | 2 |
|
| dB |
| |
Note:
1. Launched power (avg.) is power coupled into a single mode fiber with master connector.(Before of Life)
2. Measured with conformance test signal for BER = 10^–12.@6.0Gbps, PRBS=2^31-1,NRZ
有关详细信息,请在“相关下载”中查看数据表.










