产品|公司|采购|招标

网站帮助网站服务发布采购发布供应

DC12-30v UV Flame Detector with Relay Output no/nc紫外火焰

参考价面议
具体成交价以合同协议为准
  • 公司名称深圳市众安科电子有限公司
  • 品       牌
  • 型       号
  • 所  在  地深圳市
  • 厂商性质其他
  • 更新时间2025/11/5 13:13:58
  • 访问次数20
产品标签:

在线询价收藏产品 点击查看联系电话
深圳市众安科电子有限公司生产销售经销多种独立联网烟感探测器、可燃气探测器、火灾报警系统、安防报警系统产品等,在消费者当中享有较高的地位。公司与多家零售商和代理商建立了长期稳定的合作关系。 深圳市众安科电子有限公司经销国内外多家消防火灾报警产品——海湾,松江云安,北大青鸟,利达,三江,霍尼韦尔,西门子等全部通过国家消防*,品种齐全、价格合理。 深圳市众安科电子有限公司,重信用、守合同、保证产品质量,以多品种经营特色和薄利多销的原则,赢得了广大客户的信任。公司以:诚信、专业、快速、优质为企业服务理念。公司以*的产品性能、价格比,与广大工程商、经销商建立了良好的合作伙伴关系。 英文版可寻址火灾报警系统和通过EN54认证,ETL认证及CE认证的多线火灾报警系列产品,远销欧洲、美洲、非洲、澳洲及中东地区,深受广大客户好评。
一、产品说明:紫外火焰探测器(以下简称探测器)通过探测物质燃烧所产生的紫外线来探测火灾,适用于火灾发生时易产生明火的场所,对发生火灾时有强烈的火焰辐射或无阴燃阶段的火灾以及需要对火焰作出快速反应的场所均可采用本探测器
DC12-30v UV Flame Detector with Relay Output no/nc紫外火焰 产品信息

一、产品说明:

紫外火焰探测器(以下简称探测器)通过探测物质燃烧所产生的紫外线来探测火灾,适用于火灾发生时易产生明火的场所,对发生火灾时有强烈的火焰辐射或无阴燃阶段的火灾以及需要对火焰作出快速反应的场所均可采用本探测器。该探测器与其他探测器配合使用,更能及时发现火灾,尽量减少损失。探测器报警后,指示灯常亮,并输出一路继电器无源触点信号,可供外部驱动警告设备或检测信号用。

二. 特点:

l 探测器内置单片机,采用智能算法,既可以实现快速报警,又可以降低误报率。

l 探测器采用继电器型输出方式(常开,常闭可选),可直接控制其它设备。

l 传感器选用高性能进口紫外光敏管,具有灵敏度高,性能可靠,抗粉尘污染、抗潮湿及抗腐蚀能力强等优点。

三. 技术特性:

1.工作电压:DC12V~ DC28V

2.工作电流:

监视电流:≤10mA

报警电流:≤30mA

3.报警输出信号:

继电器无源常开或常闭(可通过探测器内部PCB上JP1选定为常开-NO或常闭-NC)两种可选输出,触点容量1A/DC24V.

英文版:价格可优惠

CF6002 4-wire UV Flame Detector with Relay output

The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.
It is fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.
The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. Set in a standard calibration to detect a flames at a distance of 25 meters, which flame created by 2Kg ethanol in a Container of Base 33cmX33cm, Height 5cm.

Key Specifications/Special Features

  • Operating Voltage Range:    12 to 30 VDC Volts
  • Standby Current:    ≤10 mA @ 24 VDC
  • Alarm Current    ≤30 mA @ 24 VDC
  • Spectrum:       180~290nm
  • Detection Angle:    110 degree
  • Detection Sensitivity:    Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol )
  • Relay Contact Load:    1A@DC24V
  • Normal Status:       LED blinking in 5 seconds interval
  • Alarm Status:    LED lit steady
  • Protection rating:    IP 32
  • Operating Humidity Range:   10% to 93% Relative Humidity, Non-condensing
  • Operating Temperature Range:   -10°C to 50°C (14°F to 122°F)
  • Height:         1.8? (45 mm) installed in Base
  • Diameter:         4.0? (103 mm)
  • Weight:        5.4 oz. (153g)

在找 DC12-30v UV Flame Detector with Relay Output no/nc紫外火焰 产品的人还在看

对比栏

咨询中心

编辑部 QQ交谈

客服部 QQ交谈

市场部 QQ交谈

返回首页

提示

×

*您想获取产品的资料:

以上可多选,勾选其他,可自行输入要求

个人信息: