现货倍福EP1008-0001 模块德国原装
现货倍福EP1008-0001 模块德国原装
带有数字输入的EP1008-0001 EtherCAT盒从过程级获取二进制控制信号,并以电隔离形式将其传输至控制器。信号的状态由发光二极管指示。信号通过M8螺钉型接头连接。
传感器由箱电源电压US供电。负载电压UP不在输入模块中使用,但它可以可选地连接以转发并传递到下一个模块。
连接的传感器由一个内部防短路驱动器模块供电,所有传感器的总电流为0.5 a。
由于3.0ms的输入滤波器,EP1008-0001优选地适用于电子和机械输入,从而经历信号的附加去抖动。
Technical data | EP1008-0001 |
---|---|
Protocol | EtherCAT |
Bus interface | 2 x M8 socket, shielded, screw type |
Specification | EN 61131-2, type 1/3 |
Number of inputs | 8 |
Input connections | M8, screw type |
Nominal input voltage | 24 V DC (-15 %/+20 %) |
Input filter | 3.0 ms |
“0” signal voltage | -3…+5 V (EN 61131-2, type 3) |
“1” signal voltage | 11…30 V (EN 61131-2, type 3) |
Input current | typ. 3 mA (EN 61131-2, type 3) |
Distributed clocks | – |
Sensor supply | from control voltage, max. 0.5 A, short-circuit proof in total |
Power supply connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
Current consumption from US | 120 mA |
Electrical isolation | 500 V |
Weight | approx. 165 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
Approvals/markings | CE, UL, ATEX |
Ex marking | II 3 G Ex nA IIC T4 Gc |