The purpose of the isolating amplifier Theta 60I is to electrically insolate input and output signals, respectively to amplify and / or change the signal level or type (current or voltage) of the input signals.
Theta 60I隔离放大器的目的是对输入信号和输出信号进行电化处理，分别放大和/或改变输入信号的信号电平或类型(电流或电压)。
产品资料：
Theta60I-manual
Features
· 252 standard input and output combinations selected by soldered jumpers
· User-specific input and / or output ranges
· Isolating amplifier with one input one or two electrically insulated outputs.
· Power supply 24…60VDC/AC or 85…230VDC / AC
· Electric Isolation between input, output and power supply, prevents falsified measurement due to spurious potentials.
· Flexibillity provided by more than 250 different input and output combinations selected by simply positioning soldered jumpers, help in reduced stocking.
· Processes unipolar/ bipolar and live zero signals provision for raising burden and signal conversion Green LED signals indicates device in operating condition.
· High Electrical Insulation between input and output – 2.3KV, and power supply versus all Other Circuits-3.7 KV
· Provision for either snapping the isolating amplifier on to top-hat rails or securing it with screw to a wall or panel.
特性
· 252标准输入和由焊接跳线选择的输出组合。
· 用户特定的输入和/或输出范围。
· 用一个或两个电绝缘输出隔离放大器。
· 电源直流/交流或24…85…230 vdc /交流
· 输入、输出和电源之间的电气隔离，防止由于虚假的电势而导致虚假的测量。
· 由250多个不同的输入和输出组合提供的灵活的组合，通过简单的定位焊接跳线，帮助减少库存。
· 处理单极/双极和实时零信号，用于提高负载和信号转换绿色LED信号表明设备处于运行状态。
· 输入和输出之间的高电气绝缘- 2。3kv，电源与所有其他电路之间-3.7 KV。
· 规定将隔离放大器安装到顶部的轨道上，或用螺丝固定在墙上或面板上。
