廊坊凯信密封材料有限公司(廊坊东润密封材料有限公司)
金属缠绕垫片(基本型)采用优质SUS304、SUS316(“V"形或“W"形) 金属带及其它合金材料与石墨、石棉、聚四氟乙烯、无石棉等软性材料相互重叠螺旋缠绕而成,在开始及末端用点焊方式将金属带固定。
(成都外环金属缠绕垫片)
金属缠绕垫片(基本型)采用优质SUS304、SUS316(“V”形或“W”形) 金属带及其它合金材料与石墨、石棉、聚四氟乙烯、无石棉等软性材料相互重叠螺旋缠绕而成,在开始及末端用点焊方式将金属带固定。 1.金属带材料 A. 采用厚度为0.15mm~0.25mm的08F,0Cr13, 0Cr18Ni19Ti, 0Cr18Ni9Ti, 00Cr18Ni10, 0Cr18Ni12Mo2Ti, 00Cr17Ni14Mo2,201,304,316等冷轧钢带,或由供需双方协商 确定。 B. 金属带为预成型的V型或W型窄带,表面应光滑.洁净,不应有粗糙不平.裂纹.划伤.凹坑及锈斑等缺陷 C.不锈钢的硬度值 HV≤200 D.一般的钢带的宽度是3.2mm,4.5mm,8mm,W型的钢带可以更厚。 2. 非金属带材料 A 非金属填充为特制的石棉带,柔性石墨带,聚四氟乙烯带,非石棉纤维带,陶瓷纤维及云母带等。带的厚度为 0.3-1.0mm。 B. 特制石棉烧失量必须≤25% C. 非金属带的氯离子含量≤100PPM D.各类介质及各种非金属带的推荐使用温度及压力 E.一般的钢带的宽度是3.2mm,4.5mm,8mm 3.内外环材料 常用的有304SS,316LSS,321SS,347SS,碳钢,钛,铜. mix: The flange on the pad designs to facilitate the installation of the Company under the gasket-caliber size, the gasket external welding a 2 ~ 8 positioning belt buckle for positioning hole in the flange, to prevent displacement installation gasket or falling out of the supporting material and saving hours of work. Types and gasket materials 1, Winding pads divided into four forms: that is, as the basic type A, B band strengthen ring, the C-band to strengthen the ring, the D-band, the strengthening ring. 2, the general use of materials A strip: 0 Cr13, 0Cr18Ni9 (304), 0Cr18Ni9Ti, 1Cr18Ni9Ti (321), 0Cr17Ni12Mo2 (316), 00Cr17Ni14Mo2 (316L) B, both inside and outside ring materials are A3, 304,316,316 L C, non-metallic sandwich belt: Flexible Graphite PTFE, custom-made asbestos.
(成都外环金属缠绕垫片)缠绕垫片厚度公差:
项目
厚度(mm)
公差(mm)
垫片厚度
4.5, 3.2
+0.2
-0.1
环厚度
3.0
±0.24
内外金属缠绕垫片主要技术参数:
缠绕垫片系数
m=2.5-4
缠绕垫片使用压力
≤25MPa
缠绕垫片使用温度
-196℃-700℃(氧化性介质中不高于600℃)
缠绕垫片小预紧比压
y=68MPa
金属缠绕垫内外环的分类
内环 A3 304 316
外环 A3 304 316 无外环 A3外环 304外环 316外环 无内环 A3内环 304内环 316内环 石油、化工、冶金、电力、船舶、机械等行业的管道、阀门、压力容器、冷凝器、换热器、塔、人孔、手孔等法兰连接处密封。
按照ANSI,API.DIN.JIS,JPI,BS等标准生产,或者由用户具体注明要求。使用压力≤25Mpa。