| General specifications |
|---|
| Sensing range | 200 ... 3000 mm |
| Adjustment range | 240 ... 3000 mm |
| Dead band | 0 ... 200 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 85 kHz |
| Response delay | approx. 325 ms |
| Indicators/operating means |
|---|
| LED green | solid green: Power on |
| LED yellow | solid: switching state switch output
flashing: program function |
| LED red | normal operation: "fault"
program function: no object detected |
| Electrical specifications |
|---|
| Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Operating voltage | 22 ... 253 V AC/DC |
| No-load supply current | ≤ 60 mA |
| Output |
|---|
| Output type | 1 relay output |
| Rated operating current | 3 A |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Switching frequency | ≤ 1.5 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | ± 1 % of full-scale value |
| Ambient conditions |
|---|
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP65 |
| Connection | 5-pin V95 connector (7/8"-16 UN 2A) |
| Material | |
| | Housing | PBT |
| | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 260 g |
