车充IC芯片

车充IC芯片

概述

HC6312是一款输入耐压可达30V，并且能够实现精确恒压以及恒流的降压型DC-DC转换器  车充IC芯片
HC6312内置65mΩ Power MOS，可支持2.5A持续输出电流
HC6312具备高性能的负载响应以及输入电压响应能力，同时精确的恒压和恒流控制环路实现极小的负载调整率和线性调整率，±3%的恒流精度优于市面上绝大多数同类产品
HC6312无需外部补偿，可以依靠自身内置稳定环路实现恒流以及恒压控制，同时具备线缆压降补偿功能
HC6312是一款应用极简，性能，稳定可靠的恒压恒流降压型DC-DC转换器
?
  特点
- 高性价比车载充电器方案
- 输入耐压可达30
- 内置65mΩ Power MOS，可支持2.5A持续输出电流
- 内置高精度恒流以及恒压控制环路
- 超高恒流精度 ±5%
- 恒压精度 ±2%
- 无需外部补偿
- 135k Hz固定开关频率
- 线缆补偿压降
- 短路保护(SCP)，过热保护（OTP），过压保护（OVP）以及欠压保护（UVLO）
- SOP-8L封装形式

AAP6153A is a step down PWM controller with a driving dual output current to 8A (4A+4A). It is designed to allow for operating a wide supply voltage range from 9V to 40V. The external shutdown function can be controlled by logic level to pull COMP/EN pin down, and then comes into standby mode. The external compensation makes feedback control have good line and load regulation with flexible external design.
The AAP6153A operates in the CC(Constant output Current) mode or CV(Constant output Voltage) mode, and the OCP current value is set by current sensing resisters.
The AAP6153A is suitable for the DC/DC switching power applications when requested the current limit function. The devices are available in MSOP-10L packages and require very few external devices for operation.
AAP6153A FEATURES 
VIN Operate with 9V ~ 40V Supply Voltage
- VOUT Accuracy (VREF =1.0V) ±2.0%
- Dual-Channeling CC/CV Mode Control
- External Current Limit Setting for 2 channel
- Over Temperature Protection
- Internal Soft Start ~ 3ms
- Fixed Frequency 120KHz
- UVLO Protection (min=7V, typ=7.5V, max=8V)
- Duty Cycle Range (0~90%)
- Single Pin to External Compensation and Shutdown Control
- COUT MLCC support.
- Built in Adjustable Line-Compensation
- MSOP-10L Package
AAP6153A APPLICATION