本特利330180-51-00和330180-51-05汽轮机振动监测系统前置器

产品详情资料

330180-51-00和330180-51-05本特利DIN安装振动监测前置器，属于本特利3300XL8mm电涡流传感器配套产品，用于监测机械的振动，为Bently Nevada产品， 线性范围为2mm，频率响应范围0-10kHz，灵敏度为为7.87V/mm，以位移量um为单位，X/Y方向安装，更详细信息参见本特利中国。测量原理是通过探头端部与被测物体间的间隙变化来测量振动和静位移。常用于监测发电厂、钢厂、化工厂等企业的汽轮机、风机、压缩机、水泵和电机等的振动监测。

以下规格适用于 3300 XL NSv 前置器、延长电缆和探头 

在 0°C 和 +45°C（+32°F 到 +113°F）之间，使用 -24 Vdc 电源、10 kΩ 负载、Bently 

Nevada 提供直径为 31 毫米（1.2 英寸）或更大的 AISI 4140 钢靶，以及一个探针间隙 

1.0 毫米（40 密耳）。系统精度和互换性规范不适用时 

使用针对本特利内华达 AISI 4140 钢目标以外的任何目标校准的换能器系统。

3500/06,3500/08,3500/15,3500/20,3500/22M,3500/25,3500/32,3500/33,3500/34,3500/40M,

3500/42,3500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61, 

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/65,3500/72M,3500/77M, 3500/90, 

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01, 

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92(136180-01), 3500/15 125840-01, 

3500/15 133300-01, 3500/15 127610-01

英文产品详细信息

330180-51-00 and 330180-51-05 Bently DIN mounted vibration monitoring proximitors are a supporting product of Bently 3300XL8mm eddy current sensors used to monitor mechanical vibration. They are Bently Nevada products with a linear range of 2mm, a frequency response range of 0-10kHz, and a sensitivity of 7.87V/mm. They are installed in the X/Y direction with displacement um as the unit. For more detailed information, please refer to Bently China. The measurement principle is to measure vibration and static displacement through the change in gap between the probe end and the measured object. Commonly used for monitoring the vibration of steam turbines, fans, compressors, water pumps, and motors in power plants, steel mills, chemical plants, and other enterprises.

The following specifications apply to the 3300 XL NSv Proximitor, Extension Cable, and Probe

Between 0 ° C and+45 ° C (+32 ° F to+113 ° F), use a -24 Vdc power supply, 10 k Ω load, Bently

Nevada offers AISI 4140 steel targets with a diameter of 31 millimeters (1.2 inches) or larger, as well as a probe gap

1.0 mm (40 mils). When system accuracy and interchangeability specifications are not applicable

Use a transducer system calibrated for any target other than the Bently Nevada AISI 4140 steel target.

3500/063500/083500/153500/203500/22M, 3500/253500/323500/333500/343500/40M,

3500/423500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61,

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/653500/72M, 3500/77M, 3500/90,

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01,

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92 (136180-01), 3500/15 125840-01,

3500/15 133300-01, 3500/15 127610-01

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。