通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统
深圳市德威达科技有限公司
PTFE材质,用于液体或气体
产品名称: TE系列防腐型标准孔板流量计
产品型号: TE系列
PTFE材质,用于液体或气体
产品介绍
The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.
技术参数
介质: Air and compatible gases, corrosives, high temperature fluids, and liquids.
精度: ±0.6% full scale flow (Beta = .2-.6) ±0.7% for Beta greater than .6.
温度: -40 to 200°F (-40 to 93.3°C).
压力: 150 psi max (10 bar max).
压损: 1-Beta ratio² eg: 1 - 0.7² = 1 - 0.49 = 51% of the d.p.
尺寸: 1/2" to 24", special and non-standard sizes available.
连接: 1/4" female NPT.
安装: Standard flange 125#/150# rating.
管路: General requirements 10 diameter upstream and 5 diameter downstream.
重量: Varies with line size. See catalog page.
选型:
1/2" 到24",请咨询我司。
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
商铺:https://www.afzhan.com/st16986/
主营产品:Dwyer仪器仪表,公司代理品牌有 美国 DWYER、ANDERSON、MERCOID、ITT、德国BECK、新加坡TELASIA等,产品涉及压力、流量、液位物位、风速、温湿度、阀门、气体检测、燃烧、数据采集等,广泛应用于工业自动化、暖通空调、楼宇自控、电厂、石油、化工、水处理,锅炉、压缩机、冷冻制冷设备、食品、医药、纺织、造纸、电子、环保、洁净工程等领域。
智慧城市网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份