EBFD-60倾斜开关，料位计是电厂用的一种煤位料位的检测开关、引进国外技术是一种结构简单、使用方便、安全可靠的料流、料位检测器。其体积小、安装容易，坚固且抗腐蚀。用途：溜槽或转接处堵塞探测器；输送机皮带跑偏探测器；翻车机卸料探头；用于皮带和振动给料机缺料或无料探测。

EBFD-60倾斜开关快速

EBFD-60倾斜开关厂家

技术规格

动作角度：大约20度

接点容量：100V AC0.5A 24V DC1A

输       出：NC*1

检测距离：距安装位置5M（Max）

防护等级：IP67

环境温度：-20℃~+80℃

产品特点

结构简单、坚固、抗腐蚀

耐磨损性强的上限料位开关

防护等级IP67

可单独使用探头，也可配合控制装置使用

内藏全金属外壳水银开关

工作原理
垂直悬挂的倾斜开关在受到外力作用且偏离垂直位置15度以上时，开关内部的触点动作，常闭触点断开（或常开触点闭合）。当外力撤消后，倾斜开关回复到垂直状态，触点复又闭合（或断开）。利用倾斜开关内触点开合的变化来判断设备的工作情况，以便及时采取措施，保护设备。

EBFD-60倾斜开关，料位计采用万向接点开关， 不受方向限制，环氧树脂浇封，结构呈圆柱型，使用时用户可根据所确定的位置，将本装置悬挂在料仓或料场的上方，初始位置垂直于水平面，当物料的度达到受控位置时，则挤压料位计使之倾斜，当倾斜角度大于15-30度时，开关动作，由常开转为常闭或由常闭转换成常开接点，用户将开关线路接至控制室内，即可控制料位度。

典型应用

料流检测堵料检测料位/液位检测

安装时使用钢索悬挂产品，应使电缆保持松弛。

倾斜开关技术参数
型ST-20 20-39 20-39-25、KBC-220
1、额定触点：24V/220VAC/2A
2、额定温度：-20～100℃（可订制200℃）
3、外壳材质：不锈钢
4、电缆长度：6000mm（可以订制）
5、探头长度：180mm
6、探头总长：210mm
7、尾部连接螺纹：M20×1.5×50
8、产品重量：1.2kg
ST-20P轻型
1、额定触点：24V/220VAC/2A
2、额定温度：-20～100℃（可订制200℃）
3、外壳材质：工程塑料
4、电缆长度：6000mm（可以订制）
5、探头长度：195mm
6、探头总长：230mm
7、尾部连接螺纹：M20×1.5×50
8、产品重量：0.7kg

吊在料斗内，随着投入物料的增加，当开关部分倾斜约17度时，料流内部的开关为就会动作并输出接点信号。倾斜开关铸铁结构，耐磨性较强而且牢固，广泛用于检测散状物料（如粉体、粒体、块体）料仓或中转料槽的上限料位。

·动作角度约17度

·接点构成常闭接点

·接点容量  24VDC/220 VAC

·保护等级    IP67

·外壳：铸铁结构，表面镀镍铬合金

型号：ST-20、ST-20P、20-39、20-39-25、HNST-KG、MFFP20-30

EBFD - 60 tilt switch, material level meter is coal power plant with a detection of material level switch, introdu the foreign production of imported technology is a kind of simple structure, easy to use, safe and reliable material flow, material level detector. It is small in size, easy to install, strong and resistant to corrosion. Purpose: to block the detector at the chute or transit; Conveyor belt deviation detector; Unloading probe of dumper; Used for belt and vibration feeding machine lack of material or no material detection.
Ebfd-60 tilt switch specialty is fast.
Ebfd-60 inclined switch manufacturer.
Technical specifications
Action Angle: about 20 degrees.
Contact capacity: 100V AC0.5A 24V DC1A.
Output: NC * 1
Detection distan: 5M (Max) from the installation position
Protection grade: IP67.
Ambient temperature: - 20 ℃ ~ + 80 ℃
Product features
Simple structure, strong and corrosion resistant.
High wear resistan upper limit switch.
Protection grade IP67.
The probe can be used alone, and can be used with the control devi.
Full metal enclosed mercury switch.
The working principle of
When the tilt switch of vertical suspension is affected by external for and deviates from the vertical position of 15 degrees above, the contact action inside the switch is closed, and the contact point is normally closed (or closed with open contact). When the external for is withdrawn, the tilt switch reverts to the vertical state, and the contact is closed (or disconnected). The working condition of the equipment is judged by the change of the contact opening in the tilt switch so as to take timely measures to protect the equipment.
EBFD - 60 tilt switch, adopt universal contact switch, the indicator direction without limit, epoxy resin casting, a cylindrical structure, using the location of the user can according to the identified, will this devi is hung above bin or yard, the initial position perpendicular to the horizontal plane, when the height of the material to achieve a controlled position, the extrusion of tilt, the indicator when the tilt Angle is greater than 15 to 30 degrees, switch action, from normally open to normally closed or by the normally closed into a normally open contacts, users will switch circuit connected to control indoor, can control the material level height.
Typical applications
The material flow is used to detect the detection material level/liquid level.
The cable should be kept slack when mounting with cable.
Tilt switch technical parameters.
Standard type ST-20 -39 20-39-25, KBC-220.
1. Rated contact: 24V/220VAC/2A.
2, the rated temperature: - 20 ~ 100 ℃ (200 ℃) can be customized
3. Shell material: stainless steel.
4. Cable length: 6000mm (can be customized)
5. Probe length: 180mm.
6. Total length of probe: 210mm.
7. Tail connection thread: M20 x 1.5 * 50.
8. Product weight: 1.2kg.
ST - 20 p light
1. Rated contact: 24V/220VAC/2A.
2, the rated temperature: - 20 ~ 100 ℃ (200 ℃) can be customized
3. Shell material: engineering plastics.
4. Cable length: 6000mm (can be customized)
5. Probe length: 195mm.
6. Total length of probe: 230mm.
7. Tail connection thread: M20 x 1.5 * 50.
8. Product weight: 0.7kg.
Ebfd-60 tilt switch, the material level gauge is suspended in the hopper, as the input material increases, when the switch part tilts about 17 degrees, the switch inside the feed flow will move and output the contact signal. Inclined switch cast iron structure, wear resistan is strong and strong, widely used to detect bulk material (such as powder, grain body, block body) silo or transfer tank top level.
· the action Angle is about 17 degrees.
· contact points constitute the normally closed contacts.
· contact capacity 24VDC/220 VAC.
· protection grade IP67.
· shell: cast iron structure, nickel chrome plated surfa.
Model: st-20, st-20p, 20-39, 20-39-25, hnst-kg, mffp20-30.