EBPC-60A双向拉绳开关,拉绳控制器是当皮带输送机发生事故时，能够紧急停止输送机的保护装置双向拉绳开关安装在皮带输送机两侧，用钢丝缆绳沿着输送机两侧把开关连接在一起，两开关间隔距离不应超过50 米，当皮带输送机出现紧急状况在任意位置都可紧急停止输送机使用双向拉绳开关可防止昂贵的输送带受损害以防止进一步的工矿事故和人生伤害。双向拉绳开关在安全运行输送系统里是*的保护装置，其广泛应用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等等。

EBPC-60A双向拉绳开关哪家比较好

EBPC-60A双向拉绳开关全国中

技术规格

工作电压：24VDC

接点容量：2个SPDT 400VAC10A

动作角度： 20°

缆绳动作张力：49±10N(5±1kgf)

防护等级：IP67

环境温度：-20℃～+80℃

电缆入口：M20*1.5

电缆规格：6~12mm

产品特点

具有地址编码，内置RS485总线收发器

通讯波特率可编码

的ModBus-RTU通讯协议

机械触点，没有误动作

坚固的铸铝外壳、静电防腐涂装适应于恶劣工矿环境安装

防护IP67在恶劣环境也可使用

使用性能的微动开关和无需维护的滚珠轴承，耐久性

采用旋转式凸轮结构，动作行程大，开关灵敏度复位效果好不易卡死

可附动作指示杆产品、自动复位型产品

应用范围

常规皮带输送机，包括平皮带输送机和槽形皮带输送机

地下、索道支撑皮带输送机

轮船装卸系统、堆取料输送机

EBPC-60A双向拉绳开关,拉绳控制器采用精密铝合金压铸而成，强度、外壳重量轻而且坚固，外面用红色和黄色烤漆，不易脱落，光滑而鲜艳。便于发现。用于带式输送机紧急事故而紧急停机。

用于胶带运输机现场。当发生紧急事故时，便启动本机使运输机立即停机防止事故的扩大。本产品由于安装方便、开关性能可靠，在胶带运输机中得到广泛应用。

是一种开关型传感器（即无触点行程开关）它即有行程开关、微动开关的特性，同时又具有传感性能，并且动作可靠、性能稳定、频率响应快、使用寿命长、抗干忧能力强、防水、防震、耐腐蚀等特点。广泛应用于各种输送机机械、矿山、纺织、造纸、印刷、化工、冶金、轻工、阀门、电力、保安、铁路、航天等各个行业。

安装调整
本产品一般安装在胶带运输机沿线两线机架上。
1．将拉绳开关固定在支架上。
2．两机之间距离为25~30m，采用直径Ф4mm的钢丝绳连接，松紧应适度。
3．为了减少钢丝绳自重对开关影响而产生误动作，每隔3m处的机架上焊一个托环，以支撑钢丝绳保证其能正常工作。

EBPC - 60 a two-way stretching wire switch, pull on the rope controller is when the belt conveyor accident to emergency stop conveyor protection two-way pull on the rope switch is installed on both sides of the belt conveyor, wire rope on both sides along the conveyor switch connected together, the two switch distan should not be more than 50 meters, when there is emergency belt conveyor at any position can be emergency stop conveyor use two-way pull switch can prevent the expensive conveyor belt from damage to prevent further mining accidents and hurt life. The bidirectional pull rope switch is an indispensable protection devi in the safe operation conveying system. It is widely used in steel plants, thermal power plants, ment plants, chemical plants, ports and so on.
Ebpc-60a two-way pull rope switch which is better.
Ebpc-60a two-way pull rope switch is popular in the country.
Technical specifications
Working voltage: 24VDC.
Contact capacity: 2 SPDT 400VAC10A.
Action point: 20 °
Mooring tension: 49 plus or minus 10N(5 + 1kgf)
Protection grade: IP67.
Ambient temperature: - 20 ℃ ~ + 80 ℃
Cable entran: M20*1.5.
Cable specification: 6~12mm.
Product features
With address code, built-in RS485 bus transiver.
Communication baud rate can be encoded.
Standard modbus-rtu communication protocol.
Mechanical contact, no mperation.
Strong cast aluminum shell, electrostatic anticorrosion coating suitable for the installation of harsh industrial and mining environment.
Protection standard IP67 is also available in harsh environments.
Exllent durability with high performan micro - switch and non - maintenan ball bearings.
Adopting the rotary CAM structure, the action stroke is large, the switch sensitivity high reposition effect is not easy to die.
The product can be produd with the action indicator bar and automatic reset.
Range of application
Conventional belt conveyor, including flat belt conveyor and trough belt conveyor.
Underground and cable support belt conveyor.
Ship loading and unloading system, piling conveyor.
EBPC - 60 a two-way stretching wire switch, pull on the rope controller using high precision aluminium alloy die casting production, the intensity is high, the shell weight and strong, with red and yellow paint outside, not easy to fall off, smooth and bright. Easy to find. Used for emergency shutdown of belt conveyor.
Ebpc-60a two-way pull rope switch, the pull rope controller is used in the belt conveyor field. When an emergency occurs, the machine is activated to immediay stop the aircraft to stop the accident. This product is widely used in belt conveyor because of its convenient installation and reliable switch performan.
EBPC - 60 a two-way stretching wire switch, pull on the rope controller is a kind of switch type sensor (i.e., non-contact switch) that has the characteristics of the trip switch, micro switch, at the same time has the sensor performan, and reliable, stable performan, fast frequency response, long servi life, strong ability to resist dry sorrow, waterproof, shockproof, corrosion resistan, etc. It is widely used in various industries such as machinery, mining, textile, papermaking, printing, chemical industry, metallurgy, light industry, valve, electric power, security, railway, aerospa, etc.
To install
This product is usually installed on two wire racks along the belt conveyor.
1. Attach the pull rope switch to the bracket.
2. Distan between the two machine for 25 to 30 m, connected by Ф 4 mm diameter steel wire rope, elastic should be moderate.
3. In order to redu the influen of the steel wire rope on the switch, it produs a false motion, and a bracket is welded on the rack at every 3m pla to support the wire rope to ensure its normal operation.