薄膜材料体积表面电阻试验仪

产品名称：薄膜材料体积表面电阻试验仪
产品型号：ZST-121
符合国标：GB/T1410-2006 ASTM D257-99
测量范围：0.01×104Ω～1×1018Ω
显示方式：液晶显示、直读电阻、电流
测试方法：三电极法
符合标准：
GB1410《固体电工绝缘材料绝缘电阻、体积电阻系数和表面电阻试验方法》 
ASTM D257《绝缘材料的直流电阻或电导试验方法》 

一、薄膜材料体积表面电阻试验仪概述 
    既可测量高电阻，又可测微电流。采用了美国In公司的大规模集成电路,使仪器体积小、重量轻、准确度高。以双3.1/2 位数字直接显示电阻的高阻计和电流。量限从1×104Ω ～1×1018 Ω，是目前国内测量范围zui宽，准确度zui高的数字超高阻测量仪。电流测量范围为2×10-4 ～1×10-16Ａ。机内测试电压为10/50/100/250/500/1000V任意可调。本仪器具有精度高、显示迅速、性好稳定、读数方便， 适用于固体绝缘材料体积/表面电阻率测定仪除能测电阻外，还能直接测量微弱电流。

三、技术指标 
序号    项目    参数
1    电阻测量范围    1×104Ω ～1×1018Ω
2    电流测量范围    2×10-4A～1×10-16A 
3    双表头显示    3.1/2位LED显示
4    内置测试电压    10V、50V、100V、250、500、1000V
5    基本准确度    2%
6    使用环境    温度：0℃～40℃，相对湿度<80%
7    机内测试电压    10/50/100/250/500/1000V 任意切换
8    供电形式    AC 220V，50HZ，功耗约5W
9    仪器尺寸    285ｍｍ× 245ｍｍ× 120 mm
10    质量    约2.5KG

四、工作原理 
    根据欧姆定律，被测电阻Rx等于施加电压V除以通过的电流I。传统的高阻计的工作原理是测量电压V固定，通过测量流过取样电阻的电流I来得到电阻值。从欧姆定律可以看出，由于电流I是与电阻成反比，而不是成正比，所以电阻的显示值是非线性的，即电阻无穷大时，电流为零，即表头的零位处是∞，其附近的刻度非常密，分辨率很低。整个刻度是非线性的。又由于测量不同的电阻时，其电压V也会有些变化，所以普通的高阻计是精度差、分辨率低。 
    本仪器是同时测出电阻两端的电压V和流过电阻的电流I，通过内部的大规模集成电路完成电压除以电流的计算，然后把所得到的结果经过A/D转换后以数字显示出电阻值，即便是电阻两端的电压V和流过电阻的电流I是同时变化，其显示的电阻值不象普通高阻计那样因被测电压V的变化或电流Ｉ的变化而变，所以，即使测量电压、被测量电阻、电源电压等发生变化对其结果影响不大，其测量精度很高()，从理论上讲其误差可以做到零，而实际误差可以做到千分之几或万分之几。 

典型应用 
1．测量防静电鞋、导电鞋的电阻值 
2、测量防静电材料的电阻及电阻率 
3、测量计算机房用活动地板的系统电阻值 
4、测量绝缘材料电阻(率) 
5、光电二极管暗电流测量 
6、物理,光学和材料研究 

标准配置： 
序号    配置    数量    单位
1    测试仪器    台    1
2    电源线    条    1
3    测量线    根    3
4    使用说明书    份    1

产品名称：体积表面电阻测定仪
Product Name: Volume surface resistance measuring instrument
产品型号：ZST-121
Product model: ZST-121
符合国标：GB/T1410-2006 ASTM D257-99
Conform to the national standard: ASTM D257-99 GB/T1410-2006
测量范围：0.01×104Ω～1×1018Ω
Measurement range: 0.01 * 104 ~ 1 * 1018
显示方式：液晶显示、直读电阻、电流
Display: LCD display, direct current resistance
测试方法：三电极法
Test method: three electrode method
符合标准：
Meet the standards:
GB1410《固体电工绝缘材料绝缘电阻、体积电阻系数和表面电阻试验方法》
GB1410 "test method for insulation resistance, volume resistance coefficient and surface resistance of solid electrical insulating materials"
ASTM D257《绝缘材料的直流电阻或电导试验方法》
Test method for DC resistance or conductance of insulating materials by D257 ASTM
一、概述
First, an overview
既可测量高电阻，又可测微电流。采用了美国In公司的大规模集成电路,使仪器体积小、重量轻、准确度高。以双3.1/2 位数字直接显示电阻的高阻计和电流。量限从1×104Ω ～1×1018 Ω，是目前国内测量范围zui宽，准确度zui高的数字超高阻测量仪。电流测量范围为2×10-4 ～1×10-16Ａ。机内测试电压为10/50/100/250/500/1000V任意可调。本仪器具有精度高、显示迅速、性好稳定、读数方便， 适用于固体绝缘材料体积/表面电阻率测定仪除能测电阻外，还能直接测量微弱电流。
Can measure high resistance, and measuring current. Large scale integrated circuit of In company is adopted, which makes the instrument small size, light weight and high accuracy. High resistance meter and current with dual 3.1/2 bit digital direct display resistance. The measurement range is from 1 * 104 to 1 * 1018, which is the most wide measurement range and the highest accuracy. The current measurement range is 2 * 10-4 ~ 1 * 10-16A. The test voltage of the machine is adjustable for 10/50/100/250/500/1000V. The instrument has the advantages of high accuracy, rapid display, good stability, convenient reading, which is suitable for the volume of solid insulation material volume / surface resistivity measuring instrument in addition to measuring resistance, but also can directly measure the weak current.
三、技术指标
Three, technical indicators
序号    项目    参数
Item parameters
1    电阻测量范围    1×104Ω ～1×1018Ω
1 resistance measurement range 1 * 104 ~ 1 * 1018
2    电流测量范围    2×10-4A～1×10-16A
2 current measurement range 2 * 10-4A ~ 1 * 10-16A
3    双表头显示    3.1/2位LED显示
3 double headers 3.1/2 LED display
4    内置测试电压    10V、50V、100V、250、500、1000V
4 built in test voltage 10V, 50V, 100V, 250, 500, 1000V
5    基本准确度    2%
5 basic accuracy 2%
6    使用环境    温度：0℃～40℃，相对湿度<80%
6 using ambient temperature: 0 degrees Celsius to 40 degrees Celsius, relative humidity <80%
7    机内测试电压    10/50/100/250/500/1000V 任意切换
7 machine test voltage 10/50/100/250/500/1000V arbitrary switching
8    供电形式    AC 220V，50HZ，功耗约5W
8 power supply form 220V 50HZ, AC, power consumption is about 5W
9    仪器尺寸    285ｍｍ× 245ｍｍ× 120 mm
9 instrument size 285mm * 245mm * 120 mm
10    质量    约2.5KG
10 the quality is about 2.5KG
四、工作原理
Four, working principle
根据欧姆定律，被测电阻Rx等于施加电压V除以通过的电流I。传统的高阻计的工作原理是测量电压V固定，通过测量流过取样电阻的电流I来得到电阻值。从欧姆定律可以看出，由于电流I是与电阻成反比，而不是成正比，所以电阻的显示值是非线性的，即电阻无穷大时，电流为零，即表头的零位处是∞，其附近的刻度非常密，分辨率很低。整个刻度是非线性的。又由于测量不同的电阻时，其电压V也会有些变化，所以普通的高阻计是精度差、分辨率低。
According to Ohm's law, the measured resistance Rx is equal to the applied voltage V divided by the current I. The traditional high resistance meter works is the measurement of the voltage V fixed, by measuring the flow through the sampling resistance of the current I to get the resistance value. Can be seen from Ohm's law, due to the current I is inversely proportional to the resistance, and not directly proportional to, so the resistance to the display value is nonlinear, the resistance is infinite, the current is zero, namely header zero is infinity, near the scale is very close, the resolution is too low. The whole scale is nonlinear. And since the measurement of different resistance, the voltage V will be some changes, so the average high resistance meter is poor accuracy, low resolution.
本仪器是同时测出电阻两端的电压V和流过电阻的电流I，通过内部的大规模集成电路完成电压除以电流的计算，然后把所得到的结果经过A/D转换后以数字显示出电阻值，即便是电阻两端的电压V和流过电阻的电流I是同时变化，其显示的电阻值不象普通高阻计那样因被测电压V的变化或电流Ｉ的变化而变，所以，即使测量电压、被测量电阻、电源电压等发生变化对其结果影响不大，其测量精度很高()，从理论上讲其误差可以做到零，而实际误差可以做到千分之几或万分之几。
This instrument is the current flowing through the resistor V and the voltage across the resistor I measured at the same time, the large scale integrated circuit to complete the calculation of the internal voltage divided by the current, and then the results obtained after A/D conversion by the digital display of the resistance value, even if the current voltage V and the flow resistance of the two ends of the I is changed at the same time, the resistance value is not displayed as ordinary high resistance meter as a result of changes in the measured voltage or current change of V and I, so even if the measurement voltage, the measured resistance and power voltage change has little influence on the results, the measuring accuracy is very high (patent), according to the theory of the error can do zero, while the actual error can be done a few thousandths or very few.
典型应用
Typical applications
1．测量防静电鞋、导电鞋的电阻值
1 measure the resistance value of the anti-static shoes and conductive shoes.
2、测量防静电材料的电阻及电阻率
2. Measure the resistance and resistivity of the antistatic material.
3、测量计算机房用活动地板的系统电阻值
3. Measure the system resistance value of the computer room floor.
4、测量绝缘材料电阻(率)
4, measuring the resistance of insulating materials (rate)
5、光电二极管暗电流测量
5, photoelectric diode dark current measurement
6、物理,光学和材料研究
6, physics, optics and materials research
标准配置：
Standard configuration:
序号    配置    数量    单位
Number unit
1    测试仪器    台    1
1 test instrument table 1
2    电源线    条    1
2 power cord 1
3    测量线    根    3
3 measuring line root 3
4    使用说明书    份    1
4 using the instruction manual 1