通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统
上海壹侨国际贸易有限公司
MENZEL METALLCHEMIE GmbH上海壹侨贸易有限公司
:王昊强
:
-832
:
juanjuan.lang@onebridge.cn
地址:上海市嘉定区曹安公路2038号华拓大厦410室
价注意事项:1.请提供*列的物料编号和第
上海壹侨贸易有限公司
:王昊强
:
-832
:
juanjuan.lang@onebridge.cn
地址:上海市嘉定区曹安公路2038号华拓大厦410室
价注意事项:1.请提供*列的物料编号和第二列具体型号
2.请发书面询价函(邮件,,传真等),不接受口头报价。
3.如果型号不能*对上,请提供英文品牌名+具体型号+数量。
4.询价的商友请主动告知公司名称和,谢谢。
MENZEL METALLCHEMIE GmbH MENZEL METALLCHEMIE GmbH
MENZEL METALLCHEMIE GmbH在1989年开发出的个高性能的润滑剂,没有人认为这发将成为金属加工的标准。开始被简单地用于钻头或锯,现在可以实现几乎用于所有的非机械和金属切削过程,甚至深孔钻或在传输线的高速加工。基于可生物降解的高性能油的***低数量润滑技术,门泽尔已经成为市场的和*。依靠我们多年的经验,不断优化的INDUTEC?MS系统。
产品介绍:
MENZEL METALLCHEMIE 的INDUTEC MS润滑压力容器
压力容器的单位,要根据喷洒头的数量和阀的数量,以及根据间隔喷涂和喷涂量的数量而定。
1,2,6,10或40升容量的容器是可以的。高达20升容量的所有压力容器的单位都配有一个液位控制器,该控制器可以发出信号,当液位低于***低,从而触发自动关机和报警。气动搅拌装置作为附件保证了介质常数粘度。INDUTEC? MS 0-D1 AL INDUTEC? MS 0-D2 AL INDUTEC? MS 0-D2 VA INDUTEC? MS 0-D2.6 VA INDUTEC? MS 0-D6 AL / VA INDUTEC? MS 0-D6.6 AL / VA INDUTEC? MS 0-D10 AL
INDUTEC MS润滑阀单元,根据阀上的单位,调节喷洒头的喷洒时间。可以选择用24V,110V或230V电源的版本。INDUTEC? MS VT1-1 24/110/230 V INDUTEC? MS VTR2-X* 24/110/230 V INDUTEC? MS VT2-X* 24/110/230 V
INDUTEC喷雾头,INDUTEC?MS SD代表的喷涂头的概念,它可以实现***广泛的要求。该系统是基于同轴的产生5°喷角圆射流喷头。使用特殊的配件,可以产生不同的喷洒模式和喷洒角度。由于其体积非常小,喷雾头可以被安装到一个狭小的空间。它们可以延长喷洒难以进入的领域,这是一个灵活的附件。
MENZEL METALLCHEMIE 喷雾头 MENZEL METALLCHEMIE润滑阀 MENZEL METALLCHEMIE压力容器
常用型号:
SD4
SD5
SD4
3/2-way solenoid valve(control air)
3/2-way solenoid valve(spraying air)
pressure control valve(spraying air)
pressure control gauge (spraying air)
pressure control valve(vessel pressure)
pressure control gauge (vessel pressure)
shutt-off valve
visual filling indicator(optional)
pressure vessel
filling opening
safety valve
shutt-off valve(medium)
filling level controller
INDUOIL HL 42
indutec ms AP4 OSM
indutec ms F D6 O 2M
indutec ms FA 4 90 DM
indutec ms KH 5-10
indutec ms SD4
indutec ms SID 4.0.2M
indutec ms SR RSY M
indutec ms VT5 2A O/U 24V/DC
indutec ms WA 4 M
indutec ms MVB 2 AVM
indutec ms SBT4 D:4MM
indutec ms 61.2.5 bar MS O-D6AL
Typ A G1/4", 2.5-10bar,ein 15 ms,aus 19 ms,DC Gleichstrom:24V
MS MV 3/2"A"Nr:9500000195
MS MV3/2SP Art-Nr: 9500000177
MS WA4 M Nr:9100000027
MS FA 4.90 DM Nr:9100000100
MS AP4 OS M Nr:9100000170
MS VT5-2 O/U 24 V/DC Nr:9661152024
MS F D6 2 M Nr:9560006901
MS MVB2 AVM Nr:9500000431
MS SBT4 Nr:9570000002
MS KH 5-10 Nr:9590007000
MS SID4.0.2 M Nr:9100000018
MS SD4 Nr:9100000001
MS 0-D6 AL Nr:9500006000
MS SD4 Nr:9100000001
MS MV 3/2"A"Nr:9500000195
The illustration shows an
INDUTEC® MS 1D10 230V
Standard System with a 10 litre
pressure vessel and 1 pre-assembled
coaxial spraying head/spraying time.
The simplest way of equipping a spraying point with INDUTEC® MS technology is the INDUTEC® MS Standard System.
All INDUTEC® MS Standard Systems operate in accordance with the pressure vessel principle and are triggered electro-pneumatically. They already contain all of the required components so that they can be commissioned without the need for elaborate assembly work.
INDUTEC MS 1-D2 SD4 24 V
1 coaxial spraying head, 2-litre pressure vessel, 1 spraying time,
24V power supply
INDUTEC MS 4-D6 2Z SD4 230 V
4 coaxial spraying heads, 6-litre pressure vessel, 2 spraying times,
230V power supply
With systems with synchronised spraying times, all connected coaxial spraying heads spray at the same time. With systems with two separate spraying times, two groups of coaxial spraying heads can be triggered separay from one another.
By implementing a second solenoid valve, spraying air and control air can be triggered separay from one another. This option is available as a custom model.
INDUTEC® MS Standard Systems with special power supplies, custom sizes and versions with longer feed lines or pneumatic control can be obtained on request.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份