1 use:
江苏春晨电缆有限公司：https://www.afzhan.com/st159127/
The instrument cable comprises a communication instrument and a detecting instrument cable. The cable is suitable for various ships, offshore oil and water buildings transmit voice signals and can connect line instrumentation and control equipment for ship, industrial electronic signal transmission.
2.执行标准：
2 implementation standards:
IEC60092-376（2003） 150/250V（300V)船用控制和仪表电缆
IEC60092-376 (2003) 150/250V (300V) marine control and instrument cable
IEC60092-375（1977） 船用通信电缆和射频电缆 － 普通仪表，控制和通讯电缆
IEC60092-375 (1977) marine communication cables and radio frequency cables - General instrumentation, control and communication cables
3.使用特性：
3 use characteristics:
工作温度：90℃，125℃等
Operating temperature: 90 degrees, 125 degrees C, etc.
额定电压U0/U:150/250V（300V）
Rated voltage U0/U:150/250V (300V)
zui小弯曲半径：不小于电缆外径的6倍
Minimum bending radius: no less than 6 times the diameter of the cable.
电缆的使用寿命不小于25年。
The service life of the cable is not less than 25 years.
4.性能指标：
4 performance indicators:
20℃导体直流电阻满足IEC60228标准。
20 conductor DC resistance to meet the IEC60228 standard.
20℃电缆绝缘电阻不小于5000MΩ·km。
20 temperature cable insulation resistance is not less than 5000M / km.
阻燃性能满足IEC60332 A类阻燃要求（40分钟供火，电缆的碳化高度不超过2.5m） 。
Flame retardant properties to meet the IEC60332 class a flame retardant requirements (40 minutes for the fire, the cable carbonation height of not more than 2.5m).
电压试验为2000V，5分钟绝缘不击穿
Voltage test for 2000V, 5 minutes insulation does not breakdown
On the refractory cable, its fire resistance to meet the IEC60331 (90 minutes (for fire) +15 minutes (after the fire), the flame temperature of 750 degrees C (0 ~ +50 C) cable power supply is normal, not linked to electricity.
屏蔽性能满足IEC60092-376。单元组间有绝缘电阻，满足IEC60092-376的标准要求，不小于1MΩ·km.
Shielding performance meets IEC60092-376. The unit group has an insulation resistance to meet the standard requirements of IEC60092-376, not less than 1M / km.
Cable halogen free index to meet the requirements of IEC60754.2, the release of halogen acid gas is not greater than 5mg/g, the specific detection of its pH value is not less than 4.3, the conductivity is not greater than 10 s/mm.
Cable low smoke performance: the cable smoke density (transmittance) is not less than 60%. Meet the IEC61034 standard requirements.
电缆的电容则是不大于120pF/m。该指标在IEC60092-376中还处于积累考核阶段，但在IEC60092-375中已给出。
The capacitance of the cable is not more than 120pF/m. The index is still in the accumulation of IEC60092-376 in the assessment stage, but in the IEC60092-375 has been given.
Capacitance imbalance is the length of each 500m cable does not exceed 1000pF. The index is still in the accumulation of IEC60092-376 in the assessment stage, but in the IEC60092-375 has been given.
5.电缆结构：
5 cable structure:
Conductor (conductor) using high quality annealed tin plated copper. This kind of conductor has a good corrosion protection effect. The conductor structure is divided into solid conductors, stranded conductors and soft conductor.
Insulation (insulation) using extruded insulation. The extrusion method can reduce the gas between the conductor and the insulation to prevent the impurities from entering the water vapor and the like.
线芯（color code）区分一般是采用颜色区分。颜色可以根据现场需要进行选配和加工，以方便安装。
Line core (code color) is generally used to distinguish between color. Color can be selected according to the needs of the site and processing, to facilitate the installation.
Unit group (Triads or Pair) is two or three, four insulation wire according to a certain pitch are twisted together, if need to shield outside the wrapping layer or braided shielding material. If the tape is shielded, the contact with the metal is to be a drain line (ground).
Inner sheath / inner lining (Jacket) is a high flame retardant low smoke halogen free material. The material does not contain halogen.
Armored layer (Armor) is the type of weave. This type of armored soft good, convenient for cable laying. Braid material of tinned copper wire and tinned steel wire, they have good antiseptic effect.
Outer sheath (Sheath) material is also low smoke halogen free material. This does not produce toxic gases in the combustion, and the smoke produces very little. In crowded places, the use of more.
电缆的标识可根据实际需要，进行喷印。
The identification of the cable can be sprayed and printed on the basis of the actual needs.
6.电缆型号：
6 cable model:
6.1 XLPE绝缘低烟无卤外护套结构的电缆型号：
6.1 XLPE insulated low smoke non halogen outer sheath structure of cable models:
CHJP3(P2/P/P1)EW95(85)-2/SC, CHJP3(P2/P/P1)EW95(85)-2/NC,
CHJP3 (P2/P/P1) EW95 (85) -2/SC, CHJP3 (P2/P/P1) EW95 (85) -2/NC,
6.2 EPR绝缘低烟无卤外护套结构的电缆型号：
6.2 EPR insulated low smoke non halogen outer sheath structure of cable models:
CHJP3(P2/P/P1)EW95(85)-2/SC, CHJP3(P2/P/P1)EW95(85)-2/NC,
CHJP3 (P2/P/P1) EW95 (85) -2/SC, CHJP3 (P2/P/P1) EW95 (85) -2/NC,
6.3 型号说明：
6.3 model description:
CH－表示船用仪表电缆；
Ch said instrument cable for ship;
J－XLPE绝缘；
JXLPE insulation;
E－EPR（乙丙橡胶绝缘）;
EEPR (EPDM insulation);
P3 aluminum polyester film shield; P2 copper polyester film shield;
P－铜丝编织屏蔽； P1－镀锡铜丝编织屏蔽；
- copper braid; P1 tinned copper braid;
EW low smoke non halogen polyolefin sheath;
95－镀锌钢丝编织铠装和低烟无卤外护套（编织密度不小于84％）；
95 galvanized steel wire braid and low smoke halogen-free outer sheath (density of not less than 84%);
85 －镀锡铜丝编织铠装和低烟无卤外护套（编织密度不小于84％）；JFEM6KV电机引接线
85 - tinned copper braid shielding and low smoke halogen-free outer sheath (density of not less than 84%);
SC－电缆阻燃性能满足IEC60332-3-22 A类阻燃，且卤素含量小于5mg/g；
SC cable fire retardant properties to meet the IEC60332-3-22 class a flame retardant, and halogen content less than 5mg/g;JFEM6KV电机引接线
-1-只有分屏蔽；-2－有分屏蔽和总屏蔽； -3－只有总屏蔽
-1- only has -2 shield; shield; -3 only shield
括号里面是可以替换的部分！
The bracket can be replaced!
